GT-3378
-
Payment
-
Origin
China Mainland
-
Minimum Order
15
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
One, the main purpose
This product is made of high molecular synthetic resin as the main material, adding a variety of additives, non-toxic, non solvent, no pollution, is environmentally friendly products. The main products are good initial tack, strong adhesion, open for a long time, curing time and moderate advantages is special adhesive for automobile inner decoration, mainly used for blankets, carpets, fibreboard, metal plates, and material bonding.
Two, main performance index
Exterior view: light yellow translucent block solid
Soft point: 80 + 5
Melt viscosity: 160 / 4000 / 100mpa.s
180 degrees: peel strength more than 30N/2.5cm
Hold sticky: > 2h/kg, 2.5cm
Three, use and attention
This product with the use of hot melt adhesive machine, recommended use temperature is 150-170 degrees, under constant temperature will colloid construction and the workpiece surface and with the other substrates compound fast until cooled and solidified produce bond strength. The use of temperature should not exceed 180 degrees, long time work may reduce the intrinsic properties of the colloid, thus affecting the use of results.
Four, packaging and storage
This product is a non dangerous goods, 20 kg Kraft carton lined with waterproof film bag packaging;
Five, shelf life: one year
Store in a cool, dry place, avoid direct sunlight and high temperature baking.
- GT-8S 15 Pieces / (Min. Order)
- GT-3378A 15 Pieces / (Min. Order)
- GT-3301B 15 Pieces / (Min. Order)
- GT-9A4 15 Pieces / (Min. Order)
- GT-8S 15 Pieces / (Min. Order)
- GT-3378A 15 Pieces / (Min. Order)
- GT-3301B 15 Pieces / (Min. Order)
- GT-314B 15 Pieces / (Min. Order)
- GT-314C 15 Pieces / (Min. Order)
- GT-3376 15 Pieces / (Min. Order)
- GT-371 15 Pieces / (Min. Order)
- GT-375 15 Pieces / (Min. Order)
- GT-1T 15 Pieces / (Min. Order)
- GT-6T 15 Pieces / (Min. Order)
- GT-10T 15 Pieces / (Min. Order)